|
Product Details:
|
| Model: | JK-M600 | Type: | JK-P600 |
|---|---|---|---|
| Application: | Fuse | Voltage Characteristics: | Safety Voltage |
| Voltage: | Medium | Shape: | Plug-in Type |
| Fusing Speed: | M/Medium Speed | Implementation Standard: | European Standard |
| Automatic Reset Function: | Yes | Maximum Voltage: | 20 (V) |
| Maximum Current: | 6 (A) | Holding Current: | 6 (A) |
| Operation Temperature: | Please Refer To The Specification Sheet For Details (℃) | Temperature Control Range: | Please Refer To The Specification Sheet For Details (℃) |
| Application Area: | Security Equipment | Specifications: | JK-P600 (6A/20V) |
| Highlight: | 6A PPTC Resettable Fuse,20V Lithium Battery PPTC Resettable Fuse,JK-P600 PPTC Resettable Fuse |
||
Polymer PTC Resetable Fuse For Battery Protection JK-M Series
Features:
Product Dimensions
Unit :mm
| Model | A | B | C | D | E | |||||
| Min | Max | Min | Max | Min | Max | Min | Max | Min | Max | |
| JK-P070 | 17.0 | 22.1 | 4.9 | 5.5 | 0.4 | 1.0 | 3.5 | 6.0 | 3.8 | 4.2 |
| JK-P100 | 17.0 | 22.1 | 4.9 | 5.5 | 0.4 | 1.0 | 3.5 | 6.0 | 3.8 | 4.2 |
| JK-P120 | 17.0 | 22.1 | 4.9 | 5.5 | 0.4 | 1.0 | 3.5 | 6.0 | 3.8 | 4.2 |
| JK-P175 | 20.9 | 23.1 | 4.6 | 5.5 | 0.4 | 1.0 | 3.5 | 6.0 | 3.8 | 4.2 |
| JK-P180 | 20.9 | 23.1 | 4.6 | 5.5 | 0.4 | 1.0 | 3.5 | 6.0 | 3.8 | 4.2 |
| JK-P190 | 20.9 | 23.1 | 4.6 | 5.5 | 0.4 | 1.0 | 3.5 | 6.0 | 3.8 | 4.2 |
| JK-P200 | 20.9 | 23.1 | 4.6 | 5.5 | 0.4 | 1.0 | 3.5 | 6.0 | 3.8 | 4.2 |
| JK-P210 | 20.9 | 23.1 | 4.6 | 5.5 | 0.4 | 1.0 | 3.5 | 6.0 | 3.8 | 4.2 |
| JK-P260 | 20.9 | 23.1 | 4.6 | 5.5 | 0.4 | 1.0 | 3.5 | 6.0 | 3.8 | 4.2 |
| JK-P300 | 24.0 | 27.5 | 6.9 | 7.5 | 0.4 | 1.0 | 4.0 | 7.5 | 4.8 | 5.2 |
| JK-P350 | 24.0 | 27.5 | 6.9 | 7.5 | 0.4 | 1.0 | 4.0 | 7.5 | 4.8 | 5.2 |
| JK-P380 | 24.0 | 27.5 | 6.9 | 7.5 | 0.4 | 1.0 | 4.0 | 7.5 | 4.8 | 5.2 |
| JK-P420 | 24.0 | 27.5 | 9.8 | 10.5 | 0.4 | 1.0 | 4.0 | 7.5 | 4.8 | 5.2 |
| JK-P450 | 24.0 | 27.5 | 9.8 | 10.5 | 0.4 | 1.0 | 4.0 | 7.5 | 4.8 | 5.2 |
| JK-P550 | 24.0 | 27.5 | 9.8 | 10.5 | 0.4 | 1.0 | 4.0 | 7.5 | 4.8 | 5.2 |
| JK-P600 | 27.1 | 29.1 | 13.9 | 14.5 | 0.4 | 1.0 | 4.1 | 5.5 | 5.9 | 6.6 |
| JK-P730 | 27.1 | 29.1 | 13.9 | 14.5 | 0.4 | 1.0 | 4.1 | 5.5 | 5.9 | 6.6 |
| JK-P900 | 45.4 | 47.6 | 7.9 | 8.5 | 0.4 | 1.0 | 4.6 | 6.2 | 5.9 | 6.1 |
| JK-P1410 | 58.0 | 60.0 | 13.4 | 14.0 | 0.4 | 1.0 | 4.2 | 5.8 | 5.9 | 6.1 |
Typical Time-to-Trip Charts at 25℃
Thermal Derating Chart-IH(A)
| Model | Maximum ambient operating temperatures(℃) | |||||||
| -40 | -20 | 0 | 25 | 40 | 50 | 60 | 70 | |
| JK-P070 | 1.1 | 1.0 | 0.8 | 0.7 | 0.5 | 0.4 | 0.3 | 0.2 |
| JK-P100 | 1.8 | 1.6 | 1.4 | 1.0 | 0.8 | 0.7 | 0.6 | 0.4 |
| JK-P120 | 1.9 | 1.7 | 1.5 | 1.2 | 1.0 | 0.9 | 0.8 | 0. 6 |
| JK-P175 | 2.5 | 2.2 | 2.0 | 1.75 | 1.4 | 1.3 | 1.2 | 1.0 |
| JK-P180 | 2.6 | 2.3 | 2.1 | 1.8 | 1.5 | 1.4 | 1.3 | 1.1 |
| JK-P190 | 2.8 | 2.5 | 2.3 | 1.9 | 1.6 | 1.5 | 1.4 | 1.2 |
| JK-P200 | 3.1 | 2.8 | 2.5 | 2.0 | 1.7 | 1.6 | 1.5 | 1.3 |
| JK-P210 | 3.3 | 3.0 | 2.7 | 2.1 | 1.8 | 1.7 | 1.6 | 1.4 |
| JK-P260 | 3.8 | 3.4 | 3.1 | 2.6 | 2.2 | 2.0 | 1.9 | 1.7 |
| JK-P300 | 5.0 | 4.5 | 4.0 | 3.0 | 2.7 | 2.5 | 2.1 | 1.8 |
| JK-P350 | 5.3 | 4.8 | 4.3 | 3.5 | 3.0 | 2.7 | 2.5 | 2.1 |
| JK-P380 | 5.4 | 4.9 | 4.4 | 3.8 | 3.3 | 3.0 | 2.8 | 2.5 |
| JK-P420 | 6.3 | 5.7 | 5.1 | 4.2 | 3.6 | 3.3 | 3.0 | 2.6 |
| JK-P450 | 6.5 | 5.8 | 5.3 | 4.5 | 3.9 | 3.6 | 3.3 | 2.9 |
| JK-P550 | 7.6 | 6.9 | 6.2 | 5..5 | 4.7 | 4.3 | 4.0 | 3.6 |
| JK-P600 | 8.7 | 7.8 | 7.1 | 6.0 | 5.2 | 4.7 | 4.4 | 3.9 |
| JK-P730 | 10.5 | 9.5 | 8.6 | 7.3 | 6.3 | 5.7 | 5.4 | 4.7 |
| JK-P900 | 12.7 | 11.4 | 10 | 9.0 | 7.5 | 6.8 | 6.2 | 5.5 |
| JK-P1410 | 19.9 | 17.8 | 15.7 | 14.1 | 11.8 | 10.8 | 9.7 | 8.7 |
Electrical Characteristic
| Model | Ihold | Itrip | Vmax | Imax | Pd | Itrip | Ttrip | Rmin | Rmax | R1max |
| (A) | (A) | (V) | (A) | (W) | Current(A) | Time(S) | (Ω) | (Ω) | (Ω) | |
| JK-P070 | 0.70 | 1.45 | 16 | 100 | 1.60 | 3.5 | 5.0 | 0.100 | 0.200 | 0.400 |
| JK-P100 | 1.00 | 2.50 | 16 | 100 | 1.60 | 5.0 | 5.0 | 0.070 | 0.130 | 0.260 |
| JK-P120 | 1.20 | 2.70 | 16 | 100 | 1.60 | 6.0 | 5.0 | 0.060 | 0.120 | 0.240 |
| JK-P175 | 1.75 | 3.80 | 16 | 100 | 1.60 | 8.5 | 5.0 | 0.030 | 0.065 | 0.130 |
| JK-P180 | 1.80 | 3.80 | 16 | 100 | 1.60 | 9.0 | 5.0 | 0.030 | 0.060 | 0.120 |
| JK-P190 | 1.90 | 4.20 | 16 | 100 | 1.60 | 9.5 | 5.0 | 0.025 | 0.045 | 0.090 |
| JK-P200 | 2.00 | 4.40 | 16 | 100 | 1.60 | 10.0 | 5.0 | 0.020 | 0.040 | 0.080 |
| JK-P210 | 2.10 | 4.40 | 16 | 100 | 1.60 | 10.5 | 5.0 | 0.020 | 0.035 | 0.070 |
| JK-P260 | 2.60 | 5.20 | 16 | 100 | 1.60 | 13.0 | 5.0 | 0.015 | 0.030 | 0.060 |
| JK-P300 | 3.00 | 6.30 | 24 | 100 | 2.40 | 15.0 | 5.0 | 0.015 | 0.031 | 0.062 |
| JK-P350 | 3.50 | 7.00 | 24 | 100 | 2.40 | 17.5 | 5.0 | 0.017 | 0.031 | 0.062 |
| JK-P380 | 3.80 | 7.60 | 24 | 100 | 2.40 | 19.0 | 5.0 | 0.013 | 0.022 | 0.044 |
| JK-P420 | 4.20 | 8.30 | 24 | 100 | 2.00 | 21.0 | 5.0 | 0.012 | 0.024 | 0.048 |
| JK-P450 | 4.50 | 9.00 | 20 | 100 | 2.00 | 22.5 | 5.0 | 0.011 | 0.020 | 0.040 |
| JK-P550 | 5.50 | 10.50 | 20 | 100 | 2.00 | 27.5 | 5.0 | 0.009 | 0.016 | 0.032 |
| JK-P600 | 6.00 | 11.70 | 20 | 100 | 2.80 | 30.0 | 5.0 | 0.007 | 0.014 | 0.028 |
| JK-P730 | 7.30 | 14.10 | 20 | 100 | 3.30 | 36.5 | 5.0 | 0.005 | 0.012 | 0.024 |
| JK-P900 | 9.00 | 16.70 | 20 | 100 | 3.80 | 45.0 | 5.0 | 0.006 | 0.010 | 0.020 |
| JK-P1410 | 14.10 | 26.20 | 20 | 100 | 6.00 | 70.5 | 5.0 | 0.003 | 0.005 | 0.010 |
Test Procedures And Requirements
| Test | Test Conditions | Accept/Reject Criteria |
| Resistance | In still air @ 25℃ | Rmin≤R≤Rmax |
| Time to Trip | Specified current,Vmax,25℃ | Tmaximum Time to Trip |
| Hold Current | 30min,at IH | No trip |
| Trip Cycle Life | Vmax,Imax,1000cycles | No arcing or burning |
| Trip Endurance | Vmax,24hours | No arcing or burning |
Physical Characteristics and Environmental Specifications
Physical Characteristics
| Lead material | 0.125mm nominal thickness,quarter-hard nickel |
| Tape material | Polyester |
Environmental Specifications
| Test | Conditions | Resistance Change |
| Passive aging | 70℃,1000hours | ±10% |
| Humidity aging | 85℃/85%RH.7days | ±5% |
| Vibration | MIL-STD-883C,Test Condition A | No change |
Electrical Specifications:
Ihold=Hold current: maximum current device will not trip in 25℃ still air.
Itrip= Trip current: minimum current device will always trip in 25℃ still air.
Vmax=Maximum voltage device can withstand without damage at rated current(Imax).
Imax=Maximum fault current device can withstand without damage at rated voltage(vmax).
Pd max= Power dissipated when device is in the tripped state in 25℃ still air environment at rated voltage. Max Time-to-trip=Maximum time to trip(s) at assigned current.
Rmin=Minimum device resistance prior to tripping at 25℃.
Rmax=Maximum device resistance prior to tripping at 25℃.
R1max=Maximum device resistance one hour after it is tripped at 25℃
Packaging and Storage
Packaging
Bulk,500/1000pcs per bag
Storage
The maximum ambient temperature shall not exceed 40℃. Storage temperatures higher than 40℃ couldresult in the deformation of packaging materials. The maximum relative humidity recommended for storage is70%. High humidity with high temperature can accelerate the oxidation of the solder plating on the terminationand reduce the solderability of the components. Sealed plastic bags with desiccant shall be used to reducethe oxidation of the termination and shall only be opened prior to use. The products shall not be stored inareas where harmful gases containing sulfur or chlorine are present.
Warning:
Operation beyond the maximum ratings or improper use may result in device damage and possibleelectrical arcing and flame.The devices are intended for protection against occasional overcurrent or overtemperature faultconditions and should not be used when repeated fault conditions or prolonged trip events are anticipated.Contamination of the PPTC material with certain silicon based oils or some aggressive solvents canadversely impact the performance of the devices.Device performance can be impacted negatively if devices are handled in a manner inconsistent withrecommended electronic,thermal and mechanical procedures for electronic components.Operation in circuit with a large inductance can generate a circuit voltage (L di/dt) above the rated voltageof the resettable device.
Notes:
The specification is intended to present application.product and technical data to assist the user in selecting PPTC circuit production devices,However,users should independently evaluate and test the suitability of each product.Jinrui makes on warranties as to the accuracy or completeness of the information and disclaims any liability resulting from its use,Jinrui’s only obligations are those in the Jinrui Standard Terms and Conditions of Sale and in no case will Jinrui be liable for any incidental,indirect,or consequential damages arising from the sale,resale,or misuse of its products. Jinrui reserves the right to change of update any information contained in this specification without notice.
Contact Person: Ms. Huang
Tel: 13423305709
